dmesg - 16380 MB RAM
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-229.14.1.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Tue Sep 15 15:05:51 UTC 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000040fbfffff] usable
Notice: NX (Execute Disable) protection missing in CPU!
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.1.5 11/28/2013
Hypervisor detected: Xen HVM
Xen version 4.1.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x40fc00 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0000F0000000 mask 3FFFF8000000 uncachable
1 base 0000F8000000 mask 3FFFFC000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fb730-0x000fb73f] mapped at [ffff8800000fb730]
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ee6000, 0x01ee6fff] PGTABLE
BRK [0x01ee7000, 0x01ee7fff] PGTABLE
BRK [0x01ee8000, 0x01ee8fff] PGTABLE
init_memory_mapping: [mem 0x40fa00000-0x40fbfffff]
[mem 0x40fa00000-0x40fbfffff] page 2M
BRK [0x01ee9000, 0x01ee9fff] PGTABLE
init_memory_mapping: [mem 0x40c000000-0x40f9fffff]
[mem 0x40c000000-0x40f9fffff] page 2M
init_memory_mapping: [mem 0x400000000-0x40bffffff]
[mem 0x400000000-0x40bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xefffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xefffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01eea000, 0x01eeafff] PGTABLE
BRK [0x01eeb000, 0x01eebfff] PGTABLE
RAMDISK: [mem 0x362ef000-0x3716ffff]
ACPI: RSDP 00000000000ea020 00024 (v02 Xen)
ACPI: XSDT 00000000fc00ef80 00044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 00000000fc00ed40 000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 00000000fc003040 0BC75 (v02 Xen HVM 00000000 INTL 20090123)
ACPI: FACS 00000000fc003000 00040
ACPI: APIC 00000000fc00ee40 000D8 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 00000000fc00ef20 00038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 00000000fc00ef58 00028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000040fbfffff]
Initmem setup node 0 [mem 0x00000000-0x40fbfffff]
NODE_DATA [mem 0x40fbcc000-0x40fbf2fff]
Reserving 161MB of memory at 704MB for crashkernel (System RAM: 16379MB)
[ffffea0000000000-ffffea00103fffff] PMD -> [ffff8803ff200000-ffff88040f1fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x40fbfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xefffffff]
node 0: [mem 0x100000000-0x40fbfffff]
On node 0 totalpages: 4193181
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 15296 pages used for memmap
DMA32 zone: 978944 pages, LIFO batch:31
Normal zone: 50160 pages used for memmap
Normal zone: 3210240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1f48
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 15 CPUs, 13 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:15 nr_cpu_ids:15 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88040f800000 s82752 r8192 d23744 u131072
pcpu-alloc: s82752 r8192 d23744 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4127640
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Memory: 16247304k/17035264k available (6243k kernel code, 262540k absent, 525420k reserved, 4180k data, 1604k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=15, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=15.
Experimental no-CBs for all CPUs
Experimental no-CBs CPUs: 0-14.
NR_IRQS:327936 nr_irqs:1208 16
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty0] enabled
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Detected 2600.030 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.06 BogoMIPS (lpj=2600030)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 23916 entries in 94 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (fam: 06, model: 3e, stepping: 04)
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
cpu 0 spinlock event irq 69
Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
installing Xen timer for CPU 1
mce: CPU supports 0 MCE banks
smpboot: Booting Node 0, Processors #1cpu 1 spinlock event irq 75
Brought up 2 CPUs
smpboot: Total of 2 processors activated (10679.83 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
atomic64 test passed for x86-64 platform with CX8 and with SSE
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc320-0xc32f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc300-0xc31f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0x1f40-0x1f7f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
pci 0000:00:02.0: reg 0x14: [mem 0xf3000000-0xf3000fff]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 1F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x40fc00000-0x40fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x10c0-0x1141] has been reserved
system 00:01: [io 0xb044-0xb047] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:03: [io 0x08a0-0x08a3] has been reserved
system 00:03: [io 0x0cc0-0x0ccf] has been reserved
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
xen: --> pirq=16 -> irq=8 (gsi=8)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
xen: --> pirq=17 -> irq=12 (gsi=12)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=18 -> irq=1 (gsi=1)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=19 -> irq=6 (gsi=6)
pnp 00:09: [dma 2]
pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=20 -> irq=4 (gsi=4)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=21 -> irq=7 (gsi=7)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=22 -> irq=23 (gsi=23)
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14852k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff8800ec000000-ffff8800efffffff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x427
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x427
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1458105211.125:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31258
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 62
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
xen: --> pirq=23 -> irq=30 (gsi=30)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
Cannot get hvm parameter CONSOLE_EVTCHN (18): -22!
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c300
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-229.14.1.el7.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: e99fc437bd9cbfb4f1b1da87c157ff66569bee66'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
xenbus_probe_frontend: Device with no driver: device/vbd/832
xenbus_probe_frontend: Device with no driver: device/vbd/768
xenbus_probe_frontend: Device with no driver: device/vif/0
xenbus_probe_frontend: Device with no driver: device/vif/1
rtc_cmos 00:05: setting system clock to 2016-03-16 05:13:32 UTC (1458105212)
Freeing unused kernel memory: 1604k freed
systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
systemd[1]: Detected virtualization 'xen'.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Starting -.slice.
systemd[1]: Created slice -.slice.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Timers.
systemd[1]: Reached target Timers.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[231]: starting version 208
usb 1-2: new full-speed USB device number 2 using uhci_hcd
FDC 0 is a S82078B
libata version 3.00 loaded.
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc320 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc328 irq 15
xen_netfront: Initialising Xen virtual ethernet driver
blkfront: xvdb: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvdb: xvdb1
Setting capacity to 4194304
xvdb: detected capacity change from 0 to 2147483648
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
xvda: xvda1 xvda2
Setting capacity to 209715200
xvda: detected capacity change from 0 to 107374182400
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
tsc: Refined TSC clocksource calibration: 2599.998 MHz
usb 1-2: New USB device found, idVendor=0627, idProduct=0001
usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb 1-2: Product: QEMU USB Tablet
usb 1-2: Manufacturer: QEMU 0.10.2
usb 1-2: SerialNumber: 1
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
EXT4-fs (xvda2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (xvda2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[119]: Received SIGTERM
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1458105214.980:2): selinux=0 auid=4294967295 ses=4294967295
systemd-udevd[372]: starting version 208
EXT4-fs (xvda2): re-mounted. Opts: (null)
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
input: PC Speaker as /devices/platform/pcspkr/input/input5
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Adding 2096444k swap on /dev/xvdb1. Priority:-1 extents:1 across:2096444k SSFS
ppdev: user-space parallel port driver
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
EXT4-fs (xvda1): mounting ext3 file system using the ext4 subsystem
EXT4-fs (xvda1): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[360]: Received request to flush runtime journal from PID 1
type=1305 audit(1458105219.480:3): audit_pid=467 old=0 auid=4294967295 ses=4294967295 res=1
systemd-journald[23948]: File /run/log/journal/cebd24500c2748c780832005ea620683/system.journal corrupted or uncleanly shut down, renaming and replacing.
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x427
microcode: CPU0 update to revision 0x428 failed
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x427
microcode: CPU1 update to revision 0x428 failed